Reusable Trade Show Displays for RE+ Clean Energy Exhibitors
Portable, modular booth displays for solar, storage, EV, and clean-energy brands exhibiting at RE+ built to set up without tools, pack into cases, and travel from one show to the next, so a single system works across the whole 2026 calendar.
About RE+ Events
RE+ is the largest clean energy event in North America, produced by the two non-profits behind the industry, SEIA and SEPA, and grown out of Solar Power International and Energy Storage International. It now spans the full clean-energy value chain: solar, energy storage, EV charging and infrastructure, wind, hydrogen, microgrids, and grid software. RE+ isn't a single show, either; it's a network, anchored by the national flagship in Las Vegas and supported by regional and international editions across the calendar.
If RE+ is on your exhibiting schedule, PrintMyExpo builds the displays that help clean-energy companies show up looking established and prepared and does it with booth systems designed to be reused, so the same investment works at more than one show.
Who RE+ Is For
Solar & renewable developers
Module, inverter, racking, and tracker brands, EPCs, installers, and project developers.
Storage, battery & EV
Energy storage, battery technology, and EV charging and infrastructure companies scaling quickly.
Grid, wind, hydrogen & software
Microgrid, wind, hydrogen and fuel-cell, grid-edge, and clean-energy software providers.
Who Typically Exhibits
- Solar manufacturers modules, inverters, racking & trackers
- Energy storage & battery technology providers
- EV charging & infrastructure companies
- Wind, hydrogen & fuel-cell brands
- Microgrid, grid-edge & energy-management platforms
- EPCs, installers, distributors & clean-energy financiers.
Why a Professional Booth Matters at RE+
Serious buyers and capital
You're in front of developers, utilities, and investors making real procurement and partnership decisions.
A crowded, competitive floor
With more than a thousand exhibitors, a clear, well-lit stand is how clean-energy buyers actually find you.
Credibility in a technical sale
Solar and storage are considered purchases. A polished booth signals you're an established, fundable partner.
Built to repeat
RE+ runs several shows a year, so a reusable booth keeps you consistent from Philadelphia to Las Vegas.
Booth Setups & Displays for RE+
RE+ ranges from focused regional rooms to the vast Las Vegas show floor, so size your booth to the event. Each setup below is built from portable, reusable components you can reconfigure and bring to the next show, then explore the individual displays underneath.
- Tension-fabric back wall
- 1 branded counter
- 2 retractable banner stands
- Branded table cover
- SEG backlit feature wall
- 2 counters / demo stations
- Hanging sign for visibility
- Reconfigurable modular layout
- Multi-sided modular structure
- Overhead hanging sign
- Multiple demo & meeting zones
- Full environmental branding.
One Display System, Every RE+ Show
Because RE+ runs across several cities, the most practical exhibiting budget buys once and reuses. Our fabric and SEG systems are built for exactly that pack down, travel, store, and set up again.
Reuse across shows
Modular frames and hardware are made for repeated use, so the same booth works in Philadelphia, Tampa, Schaumburg, and Las Vegas.
Portable & easy to ship
Displays pack into wheeled cases and go up with little or no tools, so there's no crating or specialist labor to budget for.
Swap graphics, not the booth
Update your message between events by changing the fabric graphic while keeping the frame, which cuts both cost and waste.
RE+ Events 2026
RE+ hosts clean-energy events across North America throughout the year. Whether you're exhibiting at one or several, we can produce and ship displays for each and help you reuse the same system between them.
How PrintMyExpo Supports Exhibitors
From the first design proof to on-site setup, we handle the parts of exhibiting that eat your time so your team can focus on the show floor.
1. Consultation & booth planning
We map your show or shows, booth size, and goals into a display plan that travels well across the RE+ calendar.
2. Design & artwork approval
Print-ready artwork with proofs for your sign-off, and graphics that are easy to update between events.
3. Premium printing & production
SEG backlit walls, tension-fabric displays, counters, and signage built for repeated use.
4. Delivery to the venue
We ship to the show on schedule, packed in cases made for transit and storage between events.
5. On-site setup & reuse support
Optional setup, plus guidance on breaking down and repacking so your booth is ready for the next RE+ stop.
RE+ Exhibitor Checklist
A quick pre-show checklist to keep your booth on schedule, whether it's your first RE+ event or your fourth:
- Confirm which RE+ event(s) you're exhibiting at
- Confirm booth size & location with RE+ Events
- Review the exhibitor kit & venue rules
- Choose a reusable, modular display system
- Finalize branding & booth messaging
- Submit artwork for design approval early
- Plan lead capture & follow-up workflow
- Arrange shipping, setup & storage with PrintMyExpo.
How to Prepare for RE+
8–10 weeks out
Confirm your show and booth size, set goals and budget, and choose a display system you can reuse.
6 weeks out
Finalize branding and submit artwork to PrintMyExpo for design approval.
3–4 weeks out
Approve proofs, complete production, and lock shipping or on-site setup.
1–2 weeks out
Prep demo materials, brief booth staff, and confirm lead capture and follow-up.
After the show
Repack your booth into its cases and store it, ready to bring to your next RE+ event.
RE+ Exhibitor FAQs
When and where is RE+ 26?
RE+ 26, the national flagship, runs November 16–19, 2026 at the Las Vegas Convention Center. RE+ also holds regional and international events across North America in 2026 — see the RE+ Events 2026 section above. Confirm details on re-plus.com before booking.
Can one booth work for multiple RE+ events?
Yes. Our fabric and SEG systems are modular and reusable: pack them into cases, store them between shows, and bring the same booth to the next RE+ event, swapping the printed graphic when your message changes.
What booth size should I choose?
A 10×10 suits RE+ regional shows and first-timers; a 10×20 gives more presence and room to demo; 20×20 islands work for the Las Vegas show floor. Tell us your event and we'll recommend a fit.
Do you handle artwork and design?
Yes. Our team creates print-ready artwork and sends proofs for approval, and your graphics are easy to update between events without replacing the frame.
Can you ship and set up at the venue?
Yes, to any RE+ venue. We deliver on schedule and offer optional on-site setup, plus guidance on repacking your booth for storage and reuse.
Are your displays a more sustainable choice?
They're built to be reused. Modular frames, replaceable fabric graphics, and cases for storage mean less reprinting and less waste when you exhibit at more than one show — a practical way to exhibit more sustainably.
Ready to Exhibit Across RE+ 2026?
Tell us which RE+ events you're planning and your booth size we'll build a reusable display system that travels with you.
Wishlist is empty.